Hot Tub Installation

Hot tub installation in the Salt Lake Valley: placement, hookup, first fill, and water balancing, quoted in writing after a site visit. Request a quote today.

Installation is getting a new or relocated hot tub from the driveway to a working, filled, balanced tub in its final spot. It is the one service on this site with no price on it, because every installation is different. Where the tub is going, what power is available, how it gets into the yard, and what it sits on all change the job.

Installation is quote only. It is not booked or paid for online. Contact us with the tub details and your address, and we will arrange a site visit and give you a written quote.

If you do not have a tub yet, we sell them too, and installation is part of that purchase. Buying a tub starts with a conversation.

Who it is for

You have ordered a new hot tub and need it placed, connected, filled, and started up
You bought a used tub and need it moved to your property and set up
You are moving and want your existing tub to come with you
A tub was delivered to your driveway and left there

If the tub is already installed and the problem is that it does not work, that is repair, not installation.

What installation includes

Every job is quoted individually, but the parts of a typical installation are:

Site check. Before anything is quoted, we look at where the tub is going. The base has to be level and strong enough for a filled tub, which weighs several thousand pounds with water and people in it. A concrete pad or a deck built for the load both work. Lawn, pavers on sand, or an old deck of unknown construction generally do not. We look at the path from the street to the spot, gate widths, steps, and anything the tub has to clear.

Electrical coordination. Most hot tubs need a dedicated circuit with a disconnect within sight of the tub. We do not do electrical work. That has to be done by a licensed electrician, and we will tell you exactly what the tub requires so your electrician can install it before we arrive.

Placement. Getting the tub onto the base, oriented the way you want it, with the equipment access panel reachable.

Hookup and first fill. Connecting the tub to the electrical supply your electrician installed, filling it, checking for leaks, and confirming the pumps, heater, jets, and controls all run.

Initial water balancing. Fill water in the Salt Lake Valley runs hard, and it gets harder in late summer when the city supplements from wells. Straight from the hose it usually needs adjusting on more than one of the five factors we test. We balance the fresh water before we leave so the tub is ready to use once it heats up.

A walkthrough. How the controls work, what to check between visits, and when to call.

Price and time

Quoted in writing after a site visit. Time on site varies from a few hours for a straightforward placement on a ready pad to a full day if access is difficult. Prices exclude chemicals and materials. The first-fill chemicals are added at cost.

We will not give a number over the phone, and we would be suspicious of anyone who does. A quote that is wrong in either direction is a problem for both of us.

How to get ready

The two things that most often hold up an installation are the base and the electrical. If you are planning ahead:

Build or pour the base first. Level, solid, sized for the tub’s footprint with some margin. Your tub’s manufacturer publishes the footprint and the filled weight.
Have the electrical done before delivery. Give your electrician the tub’s electrical spec. This is usually the longest lead-time item.
Check the path. Measure gate openings and note steps, slopes, and tight corners. Tell us about them when you contact us.
Have a hose bib within reach of the tub’s final position for the first fill and for every drain and refill after.

We go through all of this at the site visit, so if you are not sure about any of it, that is fine. It just helps to know early.

After installation

A new tub is the best possible moment to start routine maintenance. The water is fresh, the equipment is new, and a $75 visit every week or two keeps both that way. Most owners find the first few months are when they are still learning what the tub needs, and having someone test it on a schedule takes the guesswork out. After three or four months, the first drain and refill is due, and by then you will know how your tub behaves.

Where we do this

We install across the valley, including Holladay, West Valley City, and our home base in Millcreek. See the full service area. We are based in the valley, so a site visit is a short drive rather than a scheduled trip.

Questions about hot tub installation

Can I book an installation online?

No. Installation is quote only. Every site is different, and the price depends on where the tub is going, what power is there, and how it gets into the yard. Contact us with the tub details and your address and we will arrange a site visit, then give you a written quote.

What do I need to have ready before installation?

A level, solid base where the tub will sit, such as a concrete pad or a properly built deck, and the electrical supply the tub requires, installed by a licensed electrician. We will tell you exactly what your tub needs at the site visit.

Do you do the electrical work?

No. Electrical for a hot tub, including the dedicated circuit and the disconnect, must be done by a licensed electrician. We coordinate with yours on timing and make sure what they install matches what the tub requires.

Can you move a hot tub I already own?

Ask us. Relocating a tub across a yard or between properties is a different job from setting up a new one, and whether we can do it depends on the tub, the access, and the distance. Describe the situation and we will tell you.

Do you balance the water after filling?

Yes. First fill is part of installation, and we test and balance the fresh water before we leave. Fill water in the valley runs hard and usually needs adjusting straight from the hose, so a new tub is not ready to use until that is done.